Toyota 7SM10 and 7SM12 (SN:936513-up) Pallet Stacker Operate and Maintenance manual download

Illustrated factory Operate and Maintenance manual for Toyota Pallet Stackers Models 7SM10 and 7SM12 (SN:936513-up).

This manual will assist you in operating, and maintaining for your pallet stacker.
You can use a Windows, Mac, or Android device to view this manual. You only need to have a PDF reader installed.

Covered Models:
   7SM10 (SN:936513-up)
   7SM12 (SN:936513-up)

Format: PDF, 65 pages
Language: English
Table of Contents:
   SM10 7SM12
      Valid from serial number: 936513-
      Order number: 230507-040
   Safety regulations
      Warning symbols
      General safety regulations
   Warning and information plates and symbols
      Hydraulic control: Lifting/Lowering
      Travel direction
      Signal/Horn
      Capacity plate
      Identification plate
      Hydraulic control: Lower
      Serial number
      Hydraulic oil filling
      Maximum height for rated capacity
      A) Do not walk under an elevated load B) Do not stand on the forks
      Lifting points
      Modification plate.
   Presentation of the truck
      Intended application of the truck
      Prohibited application of the truck
      Truck data
      Truck dimensions
      Identification plate
      Capacity plate
      Modification plate
   Main components
      Tiller arm: The truck is manoeuvred by the driver while walking. 208 degree steering area. The brakes are applied in the tiller arm’s upper and lower positions.
      Identification plate: With model designation, serial number, year of manufacture, weight without battery, battery weight, rated capacity, battery voltage and manufacturer.
      Covers: Removable which provides good accessibility when servicing.
      Emergency switch off
      Hydraulic control: For controlling lifting and lowering functions.
      Hydraulic unit: Pump motor, pump and oil tank are integrated in a compact unit.
      Hydraulic valves: The valves are located to provide easy access.
      Drive unit with brake: Suspended drive unit with spring-loaded mechanical brake, travel motor, gears and drive wheel combined into a compact unit. Steering bearings between motor and gears.
      Serial number: The serial number plate fitted to the chassis.
      Electric panel: Removable, which provides good access when servicing. 24 volt electrical supply. The speed is variably controlled by means of a transistor.
      Support castor wheels Two support castor wheels to ensure stability.
      Battery: 24V with different Ah values. The battery is automatically locked in the battery compartment.
      Battery connector: The battery is charged via the battery connector, which is usually connected to the battery disconnector.
      Mast: Fitted with a finger guard to cover the driver's normal reach.
   Controls and instruments
      Control for lifting and lowering the forks
      Travel direction selector and speed control
      Switch for safety reversing
      Horn
      Display
      Tiller arm and brake
      Control for lowering the forks
      Emergency switch off
      Key switch
      Battery connector
      Turtle button (Option)
      Click-2-Creep function (Option)
      Keypad (Option)
      Control for lifting and lowering the forks (1)
      Travel direction selector and speed control (2)
      Switch for safety reversing (3)
      Horn (4)
      Display (5)
      Function
      Tiller arm and brake (6)
      Control for lowering the forks (7)
      Emergency switch off (8)
      Key switch (9)
      Battery connector (10)
      Display and programming
      Display
      Programming
      Warning codes
      Error codes
   Accessories
      Platform
      Load support
      Pen holder
      Integrated charger
      Turtle button
      Click-2-Creep function
      Keypad
      ID unit
   Driving
      Starting the truck
      Braking
      Deceleration
      Steering
      Parking the truck
   Transporting loads
      WARNING!
      WARNING!
      WARNING!
      WARNING!
      WARNING
      WARNING!
      WARNING!
      Collecting a load
      Depositing a load
   Battery
      Replacing the battery
      Charging the battery
      Battery maintenance
   Daily service and function checks
      WARNING!
      Pos no
      Check points
      Action
   Maintenance
      Safety regulations with maintenance work
      Maintenance work that is to be carried out by the operator
      Maintenance work that may be carried out by trained maintenance personnel
      Cleaning and washing
      Maintenance chart
      Lubrication chart
      Oil and grease specification
   Transporting and storing the truck
      The truck’s dimensions and weight as standard
      Lifting the truck
      Towing and transporting a defective truck
      Storing the truck
      Starting after a period of disuse
   Recycling/discarding
      Discarding the battery
      Scrapping the truck
      ________________